how to open combination lock without code

If you’ve ever forgotten the code to your combination lock, you know how frustrating it can be. There are a few ways to open a combination lock without the code. With a little patience and some trial and error, you’ll be able to get into your lock in no time.
To open a combination lock without the code, start by pulling up on the shackle. Then, insert a nail file or paperclip into the hole on the side of the lock and push it until you feel the tumblers click. Turn the shackle to the right until it stops and pull it out. Test the new combination by turning it to the left and then back to the right. If it doesn’t work, repeat the steps until you find one that does.

Step One: Prepare the Lock

If you’re trying to open a combination lock without the code, the first thing you’ll need to do is prepare the lock. This involves picking the right tools for the job and making sure that you have a good grip on the lock.

The most important tool you’ll need for this job is a paperclip. You’ll also need something to pick the lock with, like a hairpin or a toothpick. Make sure that your paperclip is straightened out so that it can fit into the keyhole of the lock.

Once you have your paperclip and pick, insert the paperclip into the keyhole and feel around for the pins inside. You’ll need to push these pins up in order to open the lock. It may take some trial and error to figure out which order the pins need to be pushed in, but once you get it, opening combination locks will be a breeze.

Step Two: Find the Combination

If you don’t know the combination to your lock, you’ll need to find it before you can open it. The first step is to locate the reset button on the back of the lock. Once you’ve found the reset button, press and hold it until the dial turns completely around twice. After the dial has turned around twice, release the reset button and turn the dial clockwise until it stops at the first number in the combination. Turn the dial counterclockwise until it stops at the second number in combination. Turn the dial clockwise again until it stops at the third and final number in combination. If done correctly, your lock should now be open!

Step Three: Open the Lock

If you don’t know the code to open a combination lock, don’t worry you can still open it without damaging the lock. Just follow these simple steps:

  • Find something thin and strong, like a paperclip, that you can insert into the reset hole.
  • Insert the paperclip into the reset hole and push it until you feel resistance.
  • While holding the paperclip in place, turn the knob clockwise until it stops.
  • Remove the paperclip from the reset hole and turn the knob counterclockwise until it stops again.
  • Repeat steps 2 4 two more times so that all three dials are in their original positions.
  • Now try turning the knob clockwise the lock should open.

How to Change the Code on a Combination Lock

If you need to change the code on your combination lock, follow these steps:

  • Find the reset button on the back of the lock.
  • Use a paperclip or other small object to press and hold the reset button for about three seconds.
  • Enter your new four digit code into the keypad and release the reset button.
  • Test your new code by entering it into the keypad and turning the knob to make sure it opens.

Conclusion

There are a few different ways that you can open a combination lock without the code. You can use a paperclip or bobby pin to pick the lock, or you can use a hammer and nail to brute force the lock open. Whatever method you choose, make sure you’re careful not to damage the lock. Once you’ve opened the lock, be sure to remember the code so that you don’t have to go through this process again.
Picking a lock is the most common way to open a combination lock without the code. To do this, you’ll need a paperclip or bobby pin. Insert the paperclip into the keyhole and feel around for the pins inside. You’ll need to push these pins up in order to open the lock. It may take some trial and error to figure out which order the pins need to be pushed in, but once you get it, opening combination locks will be a breeze.
If you don’t have a paperclip or bobby pin, you can also try using a hammer and nail to brute force the lock open. Insert the nail into the keyhole and tap it with the hammer until you feel the tumblers inside click into place. Once all of the tumblers are in place, turn the knob and the lock should open.


Comments

Leave a Reply

Your email address will not be published. Required fields are marked *